AFM

(redirected from Areal density)
Also found in: Thesaurus, Medical, Financial, Acronyms, Encyclopedia.

AFM

abbreviation for
(Military) Air Force Medal
Collins English Dictionary – Complete and Unabridged, 12th Edition 2014 © HarperCollins Publishers 1991, 1994, 1998, 2000, 2003, 2006, 2007, 2009, 2011, 2014
References in periodicals archive ?
The thick (4 mm) and thin (2 mm) polyurea coatings, whether on the front or back surface of steel plates, reduced about 40% and 30% of the deflection deformation, respectively, while the areal density increased by only 27% or 13%.
Figure 13 shows the sensitivity indices for the areal density. It is seen that the thickness of the core and face sheets together with the folded core height H contributes most to the areal density.
Kuo, "Directed self-assembly of block copolymer for bit patterned media with areal density of 1.5 Teradot/[Inch.sup.2] and beyond," Journal of Nanomaterials, vol.
The RBS data was analyzed by SIMNRA [11] to determine the areal density and corrected charge which was then used to analyze the PIXE spectrum in GeoPIXE [12].
The areal density [phi]is the number of target atoms contained in the cross-section of the incident beam (Fig.
For Level 2 applications the NY 52 BF was developed by optimising design and lamination--aimed at vehicles operating in the normal temperature range, that is -32[degrees]C to +49[degrees]C, it has an areal density of 112 kg/m2 and ensures an 86% light transmittance.
However, the areal density of ZnO NRs decreased with the increase of Zn powder as shown in Figure 6(c).
Areal density equals bit density, or bits of information per inch of a track multiplied by tracks per inch on a drive platter.
The transition to 28nm SoC technology provides a cost-effective way to increase the amount of data that can be stored on a hard drive by enabling higher areal density and yield through superior signal-to-noise ratio performance.
Lumbar spine, femoral neck and forearm bone mineral content (BMC) and areal density (aBMD) were measured using dual X-ray absorptiometry; lumbar spine and femoral neck apparent density (BMAD) were calculated.
The RC5100 is the industry's first 28nm read channel and features a new low-density parity check (LDPC) iterative decoding architecture, which enables HDD manufacturers to achieve increased areal density, higher yield and lower power consumption for HDDs.
Designed for mainstream notebook computers, the new WD Scorpio Blue 1 TB hard drive has a 500GB-per-platter areal density, available in a two-platter (2-disk) form factor.